Find answers, ask questions, and connect with our
community around the region.

Forums General Forum Houston, I think we found the problem…..

  • Houston, I think we found the problem…..

    Posted by Scott Collins on March 11, 2022 at 4:51 pm

    In mid-February, I picked up a 2013 MTS1200S Touring off Craigslist. It’s got a few miles on the ticker (44,000….) and I also knew it had some maintenance due and a DSS error. Hence the great deal……

    The DSS error only appeared when I rotated the handle bars to either side, so I figured it was a simple wire break. I posted about that on the FB group a few weeks ago

    Finally got around to digging into it and finding the issue. I also got my diagnostic cable from Lonelec, MelcoDiag software and ELM327 OBDII connector figured out to read/reset error codes, and other functions too. The specific code from the DSS error was all from the front, which I already suspected due to the nature of the error presentation (handlebar rotation.)

    Looks like it was issue for the prior owner too! Blue wire is broken again, and the brown wire looks kinked and will likely fail soon as well. I’ll get her fixed up and back on the road soon!

    Scott Collins replied 10 months, 4 weeks ago 1 Member · 0 Replies
  • 0 Replies

Sorry, there were no replies found.